Gets device and network parameters for a neoVI Fire device
Sets device and network parameters for a neoVI Fire device
This method writes configuration settings to a neoVI Fire device.
int _stdcall icsneoSetFireSettings(void * hObject, SFireSettings *pSettings, int iNumBytes, int bSaveToEEPROM);Public Declare Function icsneoSetFireSettings Lib “icsneo40.dll” (ByVal hObject As IntPtr, ByRef pSettings As SFireSettings , ByVal iNumBytes As Int32, ByVal bSaveToEEPROM As Int32) As Int32[DllImport(“icsneo40.dll”)] public static extern Int32 icsneoSetFireSettings(IntPtr hObject, ref SFireSettings pSettings, Int32 iNumBytes, Int32 bSaveToEEPROM);Parameters
hObject
[in] Specifies the driver object created by OpenNeoDevice.
pSettings
[out] Pointer to an SFireSettings structure.
iNumBytes
[in] This value is always the size, in bytes, of the structure.
bSaveToEEPROM
[in] If set to 0, the settings changes will revert to the values stored in EEPROM when the neoVI is power-cycled. If set to 1, the values will overwrite the EEPROM settings and become persistent across power-cycles of the neoVI.
Return Values
Returns 1 if successful, 0 if an error occurred. must be called to obtain the specific error. The errors that can be generated by this function are:
NEOVI_ERROR_DLL_NEOVI_NO_RESPONSE = 75
Remarks
Before using this function, the structure must be initialized with the current neoVI settings using .
SFireSettings FireReadSettings;
int iNumberOfBytes;
int iResult;
//################################
//FireReadSettings struct is read
//and changed as needed before
//Setting the new values
//################################
iNumberOfBytes=sizeof(SFireSettings);
iResult = icsneoSetFireSettings(m_hObject, &FireReadSettings, iNumberOfBytes, 1);
if(iResult == 0)
{
MessageBox::Show("Problem Sending FIRE configuration");
return;
}SFireSettings FireReadSettings = new SFireSettings();
int iNumberOfBytes;
int iResult;
//################################
//FireReadSettings struct is read
//and changed as needed before
//Setting the new values
//################################
iNumberOfBytes = System.Runtime.InteropServices.Marshal.SizeOf(VcanReadSettings);
iResult = icsNeoDll.icsneoSetFireSettings(m_hObject, ref FireReadSettings, iNumberOfBytes, 1);
if(iResult == 0)
{
MessageBox.Show("Problem Sending FIRE configuration");
return;
}Dim FireReadSettings As SFireSettings
Dim iNumberOfBytes As Integer
Dim iResult As Integer
'//################################
'//FireReadSettings struct is read
'//and changed as needed before
'//Setting the new values
'//################################
iNumberOfBytes = System.Runtime.InteropServices.Marshal.SizeOf(VcanReadSettings)
iResult = icsneoSetFireSettings(m_hObject, FireReadSettings, iNumberOfBytes, 1)
If iResult = 0 Then
MsgBox("Problem Sending FIRE configuration")
Exit Sub
End IfThis method reads the configuration settings from a neoVI Fire device.
int _stdcall icsneoGetFireSettings(void * hObject, SFireSettings *pSettings, int iNumBytes);Public Declare Function icsneoGetFireSettings Lib “icsneo40.dll” (ByVal hObject As IntPtr, ByRef pSettings As SFireSettings , ByVal iNumBytes As Int32) As Int32[DllImport(“icsneo40.dll”)] public static extern Int32 icsneoSetFireSettings(IntPtr hObject, ref SFireSettings pSettings, Int32 iNumBytes, Int32 bSaveToEEPROM);Parameters
hObject
[in] Specifies the driver object created by OpenNeoDevice.
pSettings
[out] Pointer to an SFireSettings structure.
iNumBytes
[in] This value is always the size, in bytes, of the structure.
Return Values
Returns 1 if successful, 0 if an error occurred. must be called to obtain the specific error. The errors that can be generated by this function are:
NEOVI_ERROR_DLL_NEOVI_NO_RESPONSE = 75
Remarks
After getting the current settings, you may change the parameters defined in the structure and write the settings back to the neoVI Fire using .
SFireSettings FireReadSettings;
int iNumberOfBytes;
int iResult;
//Get the settings
iNumberOfBytes=sizeof(SFireSettings);
iResult = icsneoGetFireSettings(m_hObject, &FireReadSettings, iNumberOfBytes);
if(iResult == 0)
{
MessageBox::Show("Problem reading FIRE configuration");
return;
}//Declared at form level and previously open with a call to OpenNeoDevice
IntPtr m_hObject; //handle for device,
SFireSettings FireReadSettings= new SFireSettings();
int iNumberOfBytes;
int iResult;
//Get the settings
iNumberOfBytes = System.Runtime.InteropServices.Marshal.SizeOf(FireReadSettings);
iResult = icsNeoDll.icsneoGetFireSettings(m_hObject,ref FireReadSettings, iNumberOfBytes);
if (iResult == 0)
{
MessageBox.Show("Problem reading FIRE configuration");
return;
}Private m_hObject As IntPtr '// Declared at form level and previously open with a call to OpenNeoDevice
Dim FireReadSettings As SFireSettings
Dim iNumberOfBytes As Integer
Dim iResult As Integer
'//Get the settings
iNumberOfBytes = System.Runtime.InteropServices.Marshal.SizeOf(FireReadSettings)
iResult = icsneoGetFireSettings(m_hObject, FireReadSettings, iNumberOfBytes)
If iResult = 0 Then
MsgBox("Problem reading FIRE configuration")
Exit Sub
End If