# Part 6 - CoreMini Console

### 1. Configure the CoreMini Console:

The CoreMini Console has a lot of information regarding the setup that is to be transferred. The output list (Figure 1:![](https://cdn.intrepidcs.net/support/VehicleSpy/assets/smOne.gif)) will notify you of any errors or warnings. If any problems exist in the script, a red dot will be next to that item to warn you that something is wrong. The **Device** section (Figure 1:![](https://cdn.intrepidcs.net/support/VehicleSpy/assets/smTwo.gif)) selects which of the connected hardware to send the script to. **The Run CoreMini After Download** checkbox (Figure 1:![](https://cdn.intrepidcs.net/support/VehicleSpy/assets/smThree.gif))tells the hardware if it should run the script after it is loaded. If this is unchecked, the script will not run until the unit is re-powered. The **Send** button (Figure 1:![](https://cdn.intrepidcs.net/support/VehicleSpy/assets/smFour.gif)) will send the script to the hardware. Remove scripts from the harware by selecting the **Clear** button (Figure 1:![](https://cdn.intrepidcs.net/support/VehicleSpy/assets/smFive.gif)). More information on the Coremini Console can be found [here](https://docs.intrepidcs.com/vspy-3-documentation/3.9.12/vehicle-spy-main-menus/main-menu-tools/utilities-coremini-console).

![Figure 1: CoreMini Console](https://2280262322-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FC3KyOmcYmM6ZVd3OQDa1%2Fuploads%2FEK7D1NJLEYmDqkgne3el%2FCoreMiniConsole.gif?alt=media\&token=73ae802e-d97f-4baa-a08e-1c40060cb208)

### 2. Connect to Vehicle or ECU:

The next step is to connect to a Vehicle or ECU and collect data!