Main Menu: Embedded Tools

The Vehicle Spy Embedded Tools main menu contains various tools for development as shown in Figure 1. Refer to Table 1 for a brief description of each selection.

Figure 1: The Vehicle Spy Embedded Tools main menu.

Table 1: Vehicle Spy Embedded Tools Menu

Embedded Tools Menu Selection	Description
DPS Archive Viewer	Opens a viewer for looking inside GM DPS archives. Note: GMLAN must be enabled on the Tools -> Options, Spy Networks tab to see this selection.
CAN Terminal	Opens CAN Terminal for ECU debugging.
J1939 Address Manager	Opens an address manager for the J1939 network. Note: J1939 must be enabled on the Tools -> Options, Spy Networks tab to see this selection.
J1939 DTC Monitor	Opens a diagnostic trouble code monitor for the J1939 network. Note: J1939 must be enabled on the Tools -> Options, Spy Networks tab to see this selection.
ISO14229 Flasher	Opens a flash tool for Ford ISO14229 ECUs. Note: GGDS must be enabled on the Tools -> Options, Spy Networks tab to see this selection.
BitSmash	Opens BitSmash tool to "smash" or corrupt a specified CAN frame. Requires ValueCAN 3, neoVI FIRE, or neoVI PLASMA hardware.