Copyright © 2024 | All Rights Reserved
| Command Name | Description | Example |
|---|
Command Name | Description | Example |
ecuname | The ECU short name. |
|
enablenetworkmanagement | If 1 the simulator uses VN (virtual network) states to determine which messages should be sent. Otherwise, they are always sent. |
|
key |
|
|
networkname | The network name according to the uef file "hsCAN" or "swCAN". |
databytes{X} | This allows default databytes to be entered for databytes0 through databytes7. |
|
description | The description of the message. This includes the ECU name followed by a backslash. "SDM\Airbag Indications" |
|
disablemessage | This disables this message if 1. |
|
overrideperiod | This will override the period of the message. |
|
period | The modified message period if "overrideperiod" is 1. |
Command Name | Description | Example |
sim | Accesses the ECU simulator. | ecu.sim.compile ;compile the simulator |
Command Name | Description | Example |
compile | Compiles the changes made to the ECUs collection. It will regenerate the tx message collection. and copy the signals from the signal collect. |
|
defaultsignaltype | This is an enumerated constant indicated for signals not accounted for in the signals collection or the replay data file. |
|
ec | Accesses the collection of Simulator ECUs for simulation. |
|
isrunning | Indicates if the simulator is running or not. | ecu.sim.isrunning? |
manualstart | Set/Returns if the simulator starts when Vehicle Spy starts. |
|
replaydatafile | Set/Returns if the name of the vehicle spy log file used for replay. |
|
repeatreplay | Set/Returns if the replay should automatically restart when the file completes. |
|
start | Starts the simulator. |
|
stop | Stops the simulator. |
|
simulatenormal | Returns/Sets if the ECUs should simulate normal messaging. |
|
simulatediagnostics | Returns/Sets if the ECUs should simulate diagnostics messaging. |
|
simulatetransmitmessages | 1 = tx message list is generated from the tx list of each ECU. 0 = tx message list is generated from the rx list of each ECU. |
|
sg |
|
tx |
|
replaystart | This starts the replay data file at the first value if the simulator is running. |
|
replaystop | This stops file replay if it is running. |
|
generatehvwakeup | If 1 the simulator will generate a single wire CAN high voltage wakeup when started. |
|
mg | Accesses the collection of Messages for simulation. Messages are only present if they apply some custom properties such as default message bytes or period. |
|
GenerateVNMF | If 1 the simulator will generate a VNMF for the single wire CAN ECUs involved in the simulation. |
|
VNMFID | This indicates the CAN ID of the VNMF used by the simulator |
|
A which will be copied to the transmit message upon compilation.
This is the sent by the simulator. It is dynamically created by the compile method.
