Copyright © 2024 | All Rights Reserved
The CoreMini Console has a lot of information regarding the setup that is to be transferred. The output list (Figure 1:
) will notify you of any errors or warnings. If any problems exist in the script, a red dot will be next to that item to warn you that something is wrong. The Device section (Figure 1:
) selects which of the connected hardware to send the script to. The Run CoreMini After Download checkbox (Figure 1:
)tells the hardware if it should run the script after it is loaded. If this is unchecked, the script will not run until the unit is re-powered. The Send button (Figure 1:) will send the script to the hardware. Remove scripts from the harware by selecting the Clear button (Figure 1:). More information on the Coremini Console can be found here.
The next step is to connect to a Vehicle or ECU and collect data!
