Part 3 - Setup The Playback Function Block

1. Open the Function Blocks Tab:

In the main menu select Scripting and Automation > Function Blocks.

2. Create a Playback Function Block:

Click on the + button and then select Playback from the dropdown that appears (Figure 1). Set the name of the function block by double clicking on the description cell. Name this function block MS CAN Playback.

Figure 1: Create a Playback function block

3. Setup Playback Function Block:

Select the Buffer tab (Figure 3: ), and make sure Continuous playback is enabled (Figure 3: ). Click the Browse button and find the MS CAN Playback.csv file downloaded from the intro page of this tutorial. Lastly, click on the Start tab (Figure 3: ) and select Manual Start from the first dropdown.

Figure 3: Playback setup