Display: Setup Screens

When the green button is pressed from the main screen the device setup screens appear.

These setup screens allow you to adjust the parameters below. These parameters without a description are explained in the main screen topic. Buttons Gray (+) and Button Yellow (-) increment and decrement the parameter. The green button (next) saves and moves to the next parameter. When all parameters are entered the red button (x) will save the settings into internal flash as the default power up settings.

Setting	Description	Notes
PLCA Enabled
PLCA Local ID
Node Count
Transmit Opportunity Timer
Max Burst for Burst Mode
Burst Timer
Oscilloscope Trigger	Selection for trigger type
Tx IFG	Inter -frame gap for transmit messages
Tx Cnt	Number of Transmits in the packet generator
Delay	Delay in micro seconds between packets in the packet generator
Size	Size of the packet in the packet generator	Size = 0 generates a random size packet
Rate	Line Rate setting in the packet generator

Figure 1 - Each setup parameter has a screen for adjustment along with helpful information.