Vehicle Spy Text API
Objective
The purpose of the Text API is to provide a simple text based command set for Vehicle Spy 3 to allow third party applications to take advantage of the power of Vehicle Spy without rewriting much code. The Text API command set is text based so it can be easily used over many interfaces such as RS232, USB, Ethernet, or Wireless. It is also independent of the operating system or development environment of the host. The command set is similar to what may be found in a programmable instrument consisting of commands and responses. You can easily write an object or function wrapper around the Text API. This will allow a more convenient use in professional languages such as C#, Visual Basic, LabVIEW, or C/C++. The Text API could also exist as a simple macro language itself.
Tips for Learning
The best way to learn the Text API is to experiment. The Text API terminal in Vehicle Spy 3 is a great tool for this purpose. Also, because most of the commands are based on the XML tags, you can just open the vs3 file in a text editor to see what properties can be manipulated via this extremely flexible API.
Summary of Rules
All commands start with the default root object.
Commands are separated by a <CR>,<LF> or <CR><LF> combination.
Commands are case insensitive. Arguments can be case sensitive if they are text based such as Description properties.
All objects and properties have the same text as their XML element names. Properties can be changed by calling out the property and supplying an argument. Property values can be returned by using a question mark ? to query the property.
The following rules are not yet supported
There is special encoding to support non ASCII, extended characters, the % escape character, and the ; comment character. Where % will be followed with the Text number in four digit hex form. For example, %000D would equal CR, %000A would be <LF>. The four digit Text allows Unicode support for text arguments such as descriptions.
The comment character is the semicolon. After the semicolon all characters are ignored until the next command.
The Text API is available as UNICODE via the Vehicle Spy 3 DLL.
Command and Queries
The basic communication consists of commands and queries. Commands set a property or execute a method. Queries request a property. Commands and Queries will return one of two of possible responses: ok or er. "ok" means that the command completed successfully. "er" means there was a problem with the command. The ok will have text following the command that indicates what command completed and any return values. Events can be either asked for with a method or can appear asynchronously in the receive stream. You also must specify, or "register", which events you wish to receive.
Table 1: Syntax of Commands, Queries, and Events
Command
methodname {arguments}
ok methodname
Queries
methodname?
ok methodname {propertyvalue}
Examples:
A successful start command Host: Start Vehicle Spy 3:ok start A unsuccessful root command Host: Startasdf Vehicle Spy 3: er command not found:startasdf A successful query Host: AutoDetectHardware? Vehicle Spy 3: ok autodetecthardware 1 example: LoadFile Method This command starts with root object and ends with a carriage return. Host: loadfile text.vs3<CR> Vehicle Spy 3: ok loadfile
neoVI PRO Text API
The neoVI PRO supports two APIs, first is the Text API and the second is the neoVI RAW API. The Text API is the default API on the USB, COM, and Ethernet (via TCP) ports; therefore, all of the Text API commands here work with the Vehicle Spy 3 code running in the neoVI PRO.
Using the Text API
The following table indicates how you can interact with the Text API.
Vehicle Spy 3
Text API Terminal
Allows you to manually type in Text API commands and see their responses.
Vehicle Spy 3
Function Blocks
Allows you to send and receive Text API commands.
Vehicle Spy 3
Via COM or TCP port
Vehicle Spy 3 can act as a COM or TCP server. Setup via Tools/Options.
neoVI PRO
neoVI PRO setup
The neoVI PRO setup allows you to send commands to neoVI PRO on the control panel.
neoVI PRO
via USB, COM and TCP ports
DLL
The TextAPI method of the icsneo40.dll
Not yet supported.
Root Objects
Root Objects for Application Signals
all?
returns all application signals that are not remote signals in a key=value comma separated string. This is used to efficiently read all app signals over a slower network.
all?
allsetup?
returns all application signals that are not remote signals in a key=description comma separated string. This is used to efficiently read all app signals descriptions over a slower network.
apprestore
Restores application signals from disk.
appsave
Saves application signals to disk. Application Signals must be enabled for saving. Signals are saved in a file in the same path as the vs3 file. {vs3 file name}.appini
as
as(index or key)
Root Objects for Diagnostic Jobs
dg
Accesses a specific diagnostic jobs by an index or a key.
dg(0).start ;starts a diag job.
Root Objects for Files and Paths
copyfile
Copies a file in the data directory to another in the data directory. Source and target are separated by a comma. Make sure the file is accessible and not in use.
copyfile MyTestfile.vs3,CopyOfMyTest.vs3
deletefile
Removes a file in the data directory. Make sure the file is accessible and not in use.
deletefile FileToDelete.vs3
dir
Returns the files in the root of the compact flash card or the Vehicle Spy data directory. A filter spec determines which files to return.
dir? *.*
diskspace
returns the amount of diskspace both available and total in kilobytes.
diskspace?
filedetails
Returns information size, time/date on a file in the data directory/neoVI PRO compact flash card.
filedetails? test.vs3
loadfile
Loads a setup file from the data directory. This command should not be called from the same instance of Vehicle spy.
loadfile test.vs3
renamefile
Renames a file in the data directory. The input and output files names are separated by a comma. Make sure the file is accessible and not in use.
renamefile FileName.vs3,NewNameForFile.vs3
status
Returns the loaded file and whether the file is running.
status?
Root Objects for Function Blocks
fb
fb.count? ;asks for the number of function blocks
fb(index or key)
fb(1).start ;starts the first function block. fb(tst2).stop ;stops the function block with key tst2.
Objects for GPS or Joystick
gps
Accesses the GPS object.
gps.latitude? gps.longitude? gps.altitude? gps.speed? gps.isvalid?
JoystickEnabled
Indicates whether the joystick is enabled or not.
JoystickSelected
Indicates which joystick is used.
Root Objects for Graphical Panels or User Interface
gp(index or key)
Graphical Panel objects.
gp(index or key).all?
returns all graphical panel control values in a key=value comma separated string. This is used to efficiently read all graphical panel data over a slower network.
gp(dia1).all?
gp(index or key).allsetup?
returns the graphical panel as an XML string.
gpallsetup?
returns all graphical panels in a key=description comma separated string. This is used to efficiently read all panel descriptions over a slower network.
ui
Root Objects for Hardware
ao
Accesses a specific analog outputs by an index or a key. See the topic on transmit message objects.
ao(0).value 3.42
id
Returns the current neoVI PRO firmware ID.
id? ;get the neoVI PRO ID.
io0isoutput or io1isoutput
Returns/Sets whether MISC1 pin is an output or input.
io0isoutput 1 ;make MISC1 and output
io0value
Returns/Sets the value of the MISC 1 pin on neoVI PRO on the DB15 connector.
io0value?
io1value
Returns/Sets the value of the MISC 2 pin on neoVI PRO on the DB15 connector.
io1value 1
ixcbusenabled
Returns/Sets whether the ixcbus is enabled.
ixcbusnetwork
Returns/Sets the network where the IXCBus protocol is used.
Root Objects for J1939
j1939dm1srcall
Returns a comma separated list of SRC addresses that have active DTC's
j1939dm1srcall?
J1939dm1src(address)
j1939dm1src(0)?
Root Objects for Messages
mg
mg(index or key)
mg(0).clearstats ;clears the stats of first msg
tx
tx.additem ;adds a message at the end of the collection
tx(index or key)
Accesses a specific transmit message by an index or a key. See the topic on transmit message objects.
tx(1).Arbid 234 ;sets the arb id in hex
Root Objects for Simulation
ecu
SimulationEnabled
Sets/Returns whether simulation is used or you are connecting to hardware.
SimulationPath
Sets/Returns the path of the file used for simulation mode.
Root Objects for Vehicle Spy
AutoDetectHardware
Sets whether Vehicle Spy will detect hardware or not.
AutoDetectHardware 1 ;sets hardware to autodetect. AutoDetectHardware? ;asks for the autodetect setting.
isrunning
Returns whether if Vehicle Spy is running or not.
isrunning?
Start
Starts Vehicle Spy.
Stop
Stops Vehicle Spy.
timedate
Returns/Sets the time date of the clock.
timedate?
Analog Output Objects
calculatefromsignal
Returns/Sets whether analog outputs are automatically calculated using busdecoder mode or can be set via the Text API. The power default is automatically calculated.
ao(0).calculatefromsignal 0 ;allow manual control
EnableCalibratedValues
Returns/Sets whether analog outputs are scaled according to the calibration scaling. Disable this feature to perform calibration.
ao(0).EnableCalibratedValues 0 ;disable for calibration
messagekey
Returns/Sets the key of the message attached to this analog output.
signalkey
Returns/Sets the key of the signal attached to this analog output. This is used in conjunction with signal key.
value
Returns/Sets the value of the output. This is only valid if calculatefromsignal is false.
ao(0).value 3.21 ;sets output to 3.21V
Collection Objects
Additem
Adds an item to the end of the collection.
fb.additem ;adds an item to the end of the collection.
Count
Indicates how many items in the collection. Read only.
tx.count? ;how many tx messages are defined?
DeleteAllObjects
Removes all items from the collection.
as.deleteallobjects ;remove all of the app signals.
KeyExists
Determines if the specified key exists in the collection.
tx.keyexists out0 ;does this key exist in the collection?
ReturnIndexFromKey
Finds the key in the collection and returns the index. If the key is not found it returns -1.
tx.returnindexfromkey out0
Function Block Objects
save
Saves the function block data.
start
Starts the function block.
fb(0).start ;starts the first function block.
stop
Stops the function block.
trigger
Triggers the function block.
J1939 Objects
dtc(code).spn
Returns the SPN number for requested DTC (specified by code)
j1939dm1src(0).dtc(0).spn?
dtc(code).FMI
Returns the FMI number for requested DTC (specified by code)
j1939dm1src(0).dtc(0).fmi?
dtc(code).oc
Returns the OC number for requested DTC (specified by code)
j1939dm1src(0).dtc(0).co?
Message Objects
ByteStringX
Sets the filter bytes for a network in hex.
mg(0).ByteString0 110
CFTimeOutsMs
Specifies the Consecutive Frame timeout in milliseconds.
ClearStats
Clears all statistical information associated with the message. Does not clear signal stats.
mg(0).ClearStats
Compile
Compiles filter bytes and equations and then makes changes activate.
Description {Text Description}
Sets the description for a message.
Set the description for message number 4 as Engine Data: mg(3).description Engine Data<CR>
DisplayColor
Sets/Returns the color the message is displayed with.
mg(0).DisplayColor 0 ;display black
EnableISO15765
This enables long messaging on CAN based off of ISO15765.
EnRxEvent {Return Msg, Return Value, Return Stats}
.sg(in3433).EnRxEvent
ExpectedLength
Sets the expected length of a specific message.
FlowCArbID
Sets/Returns CAN id used for the flow control frame in iso15765 messaging.
FlowCBlockSize
Sets/Returns the block sized used in long can messaging.
FlowCSTmin
Sets/Returns the flow control STMin.
refresh
Updates message table. This is useful when making changes to messages via text API
mg.refresh
sg
sg(index or key)
sg(0).value? ;Asks for the Value of the first signal
Signal Objects
value
Sets/Gets the value.
Description {Text Description}
Sets the description for a signal.
Set the description for signal number 4 as throttle position: mg(0).sig(3).description Throttle Position<CR>
DisplayColor
Sets/Returns the color the message is displayed.
mg(0).DisplayColor 0 ;display black
Equation
Gets/Sets the equation.
Format
Get/Sets the equation format.
refresh
Updates signal information. This is useful when making changes to signals via text API.
ASCII Chart
Last updated
