MEP (XCP/CCP) - Memory Edit Protocol
Last updated
Last updated
Copyright © 2024 | All Rights Reserved
Vehicle Spy Memory Edit Protocol (MEP) works with ECUs that use CAN Calibration Protocol (CCP) or Universal Calibration Protocol (XCP) for calibration development. MEP features are found in the Measurement -> MEP menu as shown in Figure 1.
Table 1: Vehicle Spy MEP Menu
MEP Menu Selection | Description |
---|---|
With Vehicle Spy MEP you can:
As shown in Figure 2, Vehicle Spy MEP requires an A2L file to translate the CCP/XCP message traffic with the ECU into user friendly displays and dialogs. The A2L file links an ECU memory map to measurements, calibrations, and diagnostic information. An A2L file that follows ASAM specifications can be created with the ICS ASAP2 Editor and a standard format object file that defines the ECU's memory map.
Acronyms from specifications related to Vehicle Spy MEP can be confusing, so here's a short list to help understand them:
A2L - ASAM MCD-2MC language used in an ECU's A2L file.
ASAM - Association for Standardization of Automation and Measuring Systems (www.asam.net)
ASAP2 - from German "Arbeitskreis zur Standardisierung von Applikationssystemen". Old acronym now renamed to ASAM MCD-2MC.
CCP - CAN Calibration Protocol
DAQ - Data Acquisition
MCD - Measurement, Calibration, and Diagnostics
MEP - Memory Edit Protocol
ODT - Object Descriptor Table
XCP - Universal Calibration Protocol
Opens setup dialog to work with A2L files and CCP/XCP settings.
Opens dialog to view and edit calibration values.
Opens dialog to view and edit calibration curves.
Opens dialog to view and edit calibration maps.