neoECU 10: Examples

To help make working with the neoECU10 as simple as possible, a number of examples have been put together. Click the link to access the examples.

neoECU10 Examples

Table 1: neoECU 10 Example List

Example	Function
NE10_LEDBlinking.vs3	Blinks the 5 LEDs on the neoECU 10
SW NeoECU10 HVWU.vs3	Configures SW CAN and sends a high voltage wakeup for a neoECU10 HLSL+
NE10_LSFT.vs3	Configures LSFT CAN for a neoECU10 HLSL+
NE10_ButtonLedExample.vs3	Blinks the LEDs depending on the state of the buttons pressed
NE10_MiscIO_Input.vs3	Sets the LEDs to the states of the Misc IO
NE10_MiscIO_Output.vs3	Configures the Misc IO as outputs and toggles the line
NE10_AnalogInputs.vs3	Reads the Analog inputs and send the data on a CAN Frame
HS TO MS Gateway.vs3	Gateways all traffic on HS CAN out on MS CAN

The examples are commented to explain what was done. To help with new setups, the link below has Function Blocks that can be imported to help quickly setup a neoECU 10.

neoECU10 Function Block Imports