WaveBPS
All DocsProductsLearning CenterSupport
  • Introducing WaveBPS: Portable Low level analog serial data analysis
  • Getting Data into WaveBPS
    • WaveBPS Import Data Video
  • Live Capture with WaveBPS
  • Navigation
  • Advanced Analysis
  • Automated Test with WaveBPS
  • WaveBPS Basic Databases
  • Cursor Measurements
  • Event List Columns
  • Setting up Serial Decoding in WaveBPS
  • Loading custom data into WaveBPS
  • Exporting Waveforms from WaveBPS
  • Scalar Measurement List
  • Licensing WaveBPS
  • WBPS Binary File Format
    • Double Precision Format
    • Unsigned short Format
  • CAN / CAN FD Bus
    • CAN / CAN FD Bus Bit Stuffing
    • CAN / CAN FD Bus Data Frame
    • CAN / CAN FD Bus Errors
    • Extended Data Frames
    • CAN / CAN FD Bus Physical Layers
    • CAN / CAN FD Bus Remote Data Frame
    • Single Wire CAN / CAN FD
  • FlexRay
    • FlexRay Dynamic Frame
    • FlexRay Static Frame
    • FlexRay Startup
    • FlexRay Wakeup Symbol
    • FlexRay Physical Layer
  • Example Waveforms
    • FlexRay versus CAN / CAN FD BUS
    • CAN / CAN FD bus at 70 % utilization 120 megasamples
    • CAN / CAN FD Bus Waveform Decoding
    • FlexRay Frame Decode
    • FlexRay Dynamic Frame
    • LIN Bus Decode
    • Low Speed Fault Tolerant CAN / CAN FD Waveform
  • LIN Bus
    • LIN Errors
    • LIN Frame
    • LIN Header
    • LIN Slave Section
  • Other Buses
    • UART: K-Line, J1708, ISO9141, GM CGI, RS232
    • SPI bus
    • I2C or SMBus
    • J1850
  • Compare FlexRay, CAN / CAN FD bus and LIN Bus
  • WaveBPS Video Links
  • Specifications
Powered by GitBook
LogoLogo

Applications

  • Cybersecurity
  • Data Logging
  • Simulate ECU Functions
  • Diagnostics, Testing and Validation

Products

  • Vehicle Network Adapters
  • Data Loggers
  • Software
  • Automotive Ethernet Tools

Support

  • Support Resources
  • Contact Support
  • Class Schedule & Registration
  • Training Video Library

Company

  • About
  • News
  • Events
  • Contact Us

Copyright © 2025 | All Rights Reserved

On this page
  1. FlexRay

FlexRay Static Frame

PreviousFlexRay Dynamic FrameNextFlexRay Startup

Last updated 11 months ago

In FlexRay there are two possible ways to transmit data, static frames and . The frames are nearly identical in shape. The difference is when they are allowed to be transmitted. During network design the static frame is engineered to be sent always at specific times. This "static" behavior gives the network time deterministic features. For example, the network designers can ensure a particular variable is always updated exactly every 2 milliseconds.

dynamic frames
Picture of some static frames
The above picture is the two CRCs overlaid of an identical frame sent on both A and B FlexRay Channels. Notice the CRCs are different.