Application Note: neoVI Logging neoECU DAQ
PreviousApplication Note: XCP Driver Example - Part 3: ECU Simulation and Porting XCP DriverNextApplication Note: neoVI Logging neoECU DAQ - Part 1: neoECU Setup
Last updated
Last updated
This application note will go over how to use a neoECU 10's analog inputs and send the data over HS CAN to a neoVI FIRE. The neoVI FIRE will record the data via standalone mode using CoreMini. In this example a neoECU 10 will be used, but with a few changes, any neoECU device can be used.
Included in this file:
ECUCoreMini.vs3
FIRELogging.vs3
neoECU
neoVI capable of standalone mode.