Part 4 - Your Message Specification in Action
With a message specification set up, it will be visible in the Messages view.
1. Open Messages View:
Use custom tab set at the top of the main workspace to switch back to Messages view.
2. Start Vehicle Spy:
Click the Start button (Figure 1:
) located in the upper left corner.
3. Enter Scroll Mode:
Press the Scroll button (Figure 1:
). Notice the Module Message description is present, attached to HS CAN messages with Arb ID 110. Select the Pause button (Figure 1:
) to see this more easily.
4. Enter Static Mode:
Turn scrolling off by clicking the Scroll button again. Module Message is displayed in the custom color you selected. Notice the data in the message is changing. This can be spotted easily because of the gray activity highlighting.
*Note: It is unnecessary to Stop traffic or go off-line to edit in Vehicle Spy.
Last updated
