Main Menu: Embedded Tools
Last updated
Last updated
Copyright © 2024 | All Rights Reserved
The Vehicle Spy Embedded Tools main menu contains various tools for development as shown in Figure 1. Refer to Table 1 for a brief description of each selection.
Table 1: Vehicle Spy Embedded Tools Menu
Embedded Tools Menu Selection | Description |
---|---|
Opens a viewer for looking inside GM DPS archives. Note: GMLAN must be enabled on the Tools -> Options, Spy Networks tab to see this selection.
Opens CAN Terminal for ECU debugging.
Opens an address manager for the J1939 network. Note: J1939 must be enabled on the Tools -> Options, Spy Networks tab to see this selection.
Opens a diagnostic trouble code monitor for the J1939 network. Note: J1939 must be enabled on the Tools -> Options, Spy Networks tab to see this selection.
ISO14229 Flasher
Opens a flash tool for Ford ISO14229 ECUs. Note: GGDS must be enabled on the Tools -> Options, Spy Networks tab to see this selection.
Opens BitSmash tool to "smash" or corrupt a specified CAN frame. Requires ValueCAN 3, neoVI FIRE, or neoVI PLASMA hardware.