Main Menu: Spy Networks

The Spy Networks menu contains many common tasks as shown in Figure 1. Refer to Table 1 for a brief description of each selection.

Figure 1: Spy Networks menu.

Table 1: Spy Networks task descriptions.

Spy Networks Menu SelectionDescription

Opens Snapshot view for quick and simple diagnostics. Note: GMLAN must be enabled on the Tools -> Options, Spy Networks tab to see this selection.

Opens Messages view to monitor message traffic.

Opens Messages Editor for creating and viewing message and signal definitions.

Opens Tx Panel for transmitting messages.

Opens Networks view to configure hardware and networks.

Opens TCP/IP view to allow for modification of a device's ethernet settings.

Opens FlexRay Controllers view for configuring and modifying FlexRay controllers.

Opens FlexRay cycles view.

A2B Traffic

Opens A2B view which allows the monitoring and modification of Automotive Audio Bus traffic.

Opens Diagnostics view for launching diagnostic jobs and seeing their results.

Opens DoIP view for sending Diagnostic jobs over IP.

Opens Simulator view for configuring a simulation from a database.

Opens ECUs view to setup diagnostic information for ECUs.

Last updated