Part 6 - CoreMini Console

1. Configure the CoreMini Console:

The CoreMini Console has a lot of information regarding the setup that is to be transferred. The output list (Figure 1:) will notify you of any errors or warnings. If any problems exist in the script, a red dot will be next to that item to warn you that something is wrong. The Device section (Figure 1:) selects which of the connected hardware to send the script to. The Run CoreMini After Download checkbox (Figure 1:)tells the hardware if it should run the script after it is loaded. If this is unchecked, the script will not run until the unit is re-powered. The Send button (Figure 1:) will send the script to the hardware. Remove scripts from the harware by selecting the Clear button (Figure 1:). More information on the Coremini Console can be found here.

Figure 1: CoreMini Console

2. Connect to Vehicle or ECU:

The next step is to connect to a Vehicle or ECU and collect data!