Copyright © 2024 | All Rights Reserved
To help make working with the neoECU10 as simple as possible, a number of examples have been put together. Click the link to access the examples.
Table 1: neoECU 10 Example List
Example | Function |
---|---|
The examples are commented to explain what was done. To help with new setups, the link below has Function Blocks that can be imported to help quickly setup a neoECU 10.
NE10_LEDBlinking.vs3
Blinks the 5 LEDs on the neoECU 10
SW NeoECU10 HVWU.vs3
Configures SW CAN and sends a high voltage wakeup for a neoECU10 HLSL+
NE10_LSFT.vs3
Configures LSFT CAN for a neoECU10 HLSL+
NE10_ButtonLedExample.vs3
Blinks the LEDs depending on the state of the buttons pressed
NE10_MiscIO_Input.vs3
Sets the LEDs to the states of the Misc IO
NE10_MiscIO_Output.vs3
Configures the Misc IO as outputs and toggles the line
NE10_AnalogInputs.vs3
Reads the Analog inputs and send the data on a CAN Frame
HS TO MS Gateway.vs3
Gateways all traffic on HS CAN out on MS CAN