neoECU 10: Examples
To help make working with the neoECU10 as simple as possible, a number of examples have been put together. Click the link to access the examples.
Table 1: neoECU 10 Example List
| Example | Function |
|---|---|
NE10_LEDBlinking.vs3 | Blinks the 5 LEDs on the neoECU 10 |
SW NeoECU10 HVWU.vs3 | Configures SW CAN and sends a high voltage wakeup for a neoECU10 HLSL+ |
NE10_LSFT.vs3 | Configures LSFT CAN for a neoECU10 HLSL+ |
NE10_ButtonLedExample.vs3 | Blinks the LEDs depending on the state of the buttons pressed |
NE10_MiscIO_Input.vs3 | Sets the LEDs to the states of the Misc IO |
NE10_MiscIO_Output.vs3 | Configures the Misc IO as outputs and toggles the line |
NE10_AnalogInputs.vs3 | Reads the Analog inputs and send the data on a CAN Frame |
HS TO MS Gateway.vs3 | Gateways all traffic on HS CAN out on MS CAN |
The examples are commented to explain what was done. To help with new setups, the link below has Function Blocks that can be imported to help quickly setup a neoECU 10.
